Home / Medium Vacuum Pump / Dry Vacuum Pumps / Page 4Girovac equipment catalogue
Dry Vacuum Pumps Dry vacuum pumps use an oil-free pumping chamber for laboratory, analytical and industrial duties. Compare scroll, multistage Roots and dry screw technologies by working pressure, gas load, cycle frequency, vapour handling and electrical supply.
Diaphragm Vacuum Pumps → Dry Multistage Roots Vacuum Pumps → Dry Screw Vacuum Pumps → Dry Scroll Vacuum Pumps → Showing 37–48 of 63 results
LEYBOLD
End / ultimate pressure <0.005 mbar partial pressure, without purge or with exhaust shaft-seal purge only
Electrical supply 380–460 V ±10%, three-phase, 50/60 Hz for listed 400 V build
Cooling Water; specified water quality, flow and temperature required Compare View specifications → LEYBOLD
End / ultimate pressure <0.005 mbar partial pressure, without purge or with exhaust shaft-seal purge only
Electrical supply 380–460 V ±10%, three-phase, 50/60 Hz for listed 400 V build
Cooling Water; specified water quality, flow and temperature required Compare View specifications → LEYBOLD
End / ultimate pressure <0.01 mbar with inlet and outlet shaft-seal purge
Electrical supply 380–460 V ±10%, three-phase, 50/60 Hz for listed 400 V build
Cooling Water; specified water quality, flow and temperature required Compare View specifications → LEYBOLD
End / ultimate pressure <0.05 mbar with inlet and outlet shaft-seal purge
Electrical supply 380–460 V ±10%, three-phase, 50/60 Hz for listed 400 V build
Cooling Water; specified water quality, flow and temperature required Compare View specifications → EDWARDS
Electrical supply Single-phase 100–127 V ±10% or 200–240 V ±10%, 50–60 Hz
Peak pumping speed 22 m³/h
Ultimate pressure, gas ballast 0 0.03 mbar Compare View specifications → LEYBOLD
End / ultimate pressure 0.1 mbar gas ballast closed; 0.15 mbar one turn open
Electrical supply Voltage-specific single-phase 100, 115, 200 or 230 V; 50/60 Hz
Peak pumping speed, 50 / 60 Hz 3.0 / 3.5 m³/h Compare View specifications → LEYBOLD
End / ultimate pressure 0.1 mbar gas ballast closed; 0.15 mbar one turn open
Electrical supply Voltage-specific single-phase 100, 115, 200 or 230 V; 50/60 Hz
Peak pumping speed, 50 / 60 Hz 3.0 / 3.5 m³/h Compare View specifications → EDWARDS
Electrical supply Single-phase 100–127 V ±10% or 200–240 V ±10%, 50–60 Hz
Peak pumping speed 6.2 m³/h
Ultimate pressure, gas ballast 0 0.02 mbar Compare View specifications → EDWARDS
Electrical supply Single-phase 100–127 V ±10% or 200–240 V ±10%, 50–60 Hz
Peak pumping speed 11.4 m³/h
Ultimate pressure, gas ballast 0 0.007 mbar Compare View specifications → EDWARDS
Electrical supply Single-phase 100–127 V ±10% or 200–240 V ±10%, 50–60 Hz
Peak pumping speed 15.1 m³/h
Ultimate pressure, gas ballast 0 0.007 mbar Compare View specifications → LEYBOLD
End / ultimate pressure 0.01 mbar without gas ballast
Electrical supply Three-phase, version-specific: 200/400 V ±10% at 50 Hz; 230/460 V or 200/380 V ±10% at 60 Hz
Maximum pumping speed 105 m³/h without gas ballast; ±5%, C5 manual Compare View specifications → LEYBOLD
End / ultimate pressure <0.03 mbar without gas ballast
Electrical supply Single-phase 100–120 V or 200–240 V ±10%, 50/60 Hz; separate order codes
Maximum pumping speed 40 m³/h on air, without gas ballast; ±5% Compare View specifications → Select a dry technology ECODRY plus covers clean-gas laboratory roughing and backing, including a separate helium-recovery version. SCROLLVAC plus provides compact scroll pumping with configuration-dependent performance. NOVADRY and VARODRY extend the choice to air-cooled industrial dry screw pumps. Dry compression does not remove maintenance or process-compatibility requirements.
Explore the ECODRY , SCROLLVAC , NOVADRY and VARODRY family guides.
Need help choosing equipment? Send the operating requirements and process details. For a replacement, include the existing model and connection.