Home / Medium Vacuum Pump / Dry Vacuum Pumps / Page 3Girovac equipment catalogue
Dry Vacuum Pumps Dry vacuum pumps use an oil-free pumping chamber for laboratory, analytical and industrial duties. Compare scroll, multistage Roots and dry screw technologies by working pressure, gas load, cycle frequency, vapour handling and electrical supply.
Diaphragm Vacuum Pumps → Dry Multistage Roots Vacuum Pumps → Dry Screw Vacuum Pumps → Dry Scroll Vacuum Pumps → Showing 25–36 of 63 results
EDWARDS
Nominal pumping capacity 1.2 m³/h (20 l/min, published) at 50 Hz
End / ultimate pressure 8 mbar at 50 Hz
Motor power 120 W Compare View specifications → EDWARDS
Nominal pumping capacity 2 m³/h (34 l/min, published) at 50 Hz
End / ultimate pressure 8 mbar at 50 Hz
Motor power 245 W Compare View specifications → EDWARDS
Electrical supply 100–127 / 200–240 V ±10%, switchable single-phase, 50/60 Hz
Peak pumping speed 60 m³/h
Ultimate total pressure 0.03 mbar Compare View specifications → EDWARDS
Electrical supply 100–127 / 200–240 V ±10%, switchable single-phase, 50/60 Hz
Peak pumping speed 90 m³/h
Ultimate total pressure 0.03 mbar Compare View specifications → EDWARDS
Electrical supply 100–127 / 200–240 V ±10%, switchable single-phase, 50/60 Hz
Peak pumping speed 120 m³/h
Ultimate total pressure 0.03 mbar Compare View specifications → EDWARDS
Electrical supply 100–127 / 200–240 V ±10%, switchable single-phase, 50/60 Hz
Peak pumping speed 40 m³/h
Ultimate total pressure 0.03 mbar Compare View specifications → EDWARDS
Electrical supply 100–127 / 200–240 V ±10%, switchable single-phase, 50/60 Hz
Peak pumping speed 30 m³/h
Ultimate total pressure 0.03 mbar Compare View specifications → EDWARDS
End / ultimate pressure 0.1 mbar, gas ballast closed; 0.15 mbar, one turn open
Electrical supply Voltage-specific 100, 115, 200 or 230 V single-phase; 50/60 Hz
Maximum pumping speed, 50 / 60 Hz 3 / 3.5 m³/h Compare View specifications → EDWARDS
End / ultimate pressure 0.1 mbar, gas ballast closed; 0.15 mbar, one turn open
Electrical supply Voltage-specific 100, 115, 200 or 230 V single-phase; 50/60 Hz
Maximum pumping speed, 50 / 60 Hz 3 / 3.5 m³/h Compare View specifications → LEYBOLD
End / ultimate pressure <0.01 mbar with inlet and outlet shaft-seal purge
Electrical supply 380–460 V ±10%, three-phase, 50/60 Hz for listed 400 V build
Cooling Water; specified water quality, flow and temperature required Compare View specifications → LEYBOLD
End / ultimate pressure <0.005 mbar partial pressure, without purge or with exhaust shaft-seal purge only
Electrical supply 380–460 V ±10%, three-phase, 50/60 Hz for listed 400 V build
Cooling Water; specified water quality, flow and temperature required Compare View specifications → LEYBOLD
End / ultimate pressure <0.005 mbar partial pressure, without purge or with exhaust shaft-seal purge only
Electrical supply 380–460 V ±10%, three-phase, 50/60 Hz for listed 400 V build
Cooling Water; specified water quality, flow and temperature required Compare View specifications → Select a dry technology ECODRY plus covers clean-gas laboratory roughing and backing, including a separate helium-recovery version. SCROLLVAC plus provides compact scroll pumping with configuration-dependent performance. NOVADRY and VARODRY extend the choice to air-cooled industrial dry screw pumps. Dry compression does not remove maintenance or process-compatibility requirements.
Explore the ECODRY , SCROLLVAC , NOVADRY and VARODRY family guides.
Need help choosing equipment? Send the operating requirements and process details. For a replacement, include the existing model and connection.