DVP VB 315 Claw Vacuum Pump
The DVP VB 315 is a dry claw vacuum pump from DVP Vacuum Technology. It pumps 315 m³/h and reaches an ultimate pressure of 150 mbar absolute. Girovac supplies the VB 315 in the UK, stocks genuine DVP spares and vanes, and services DVP pumps in-house. Price on application.
DVP VB 315 at a glance
| Pumping speed | 315 m³/h (50 Hz) / 380 m³/h (60 Hz) |
|---|---|
| Ultimate pressure | 150 mbar |
| Motor power | 5.5 kW at 50 Hz / 6.6 kW at 60 Hz |
| Weight | 305 kg |
| Price | On application |
What is the DVP VB 315?
The VB 315 is part of DVP’s claw pump range — 315 m³/h dry claw vacuum pump, ultimate 150 mbar. It runs completely dry, so there is no oil to change, no oil mist at the exhaust and no chance of oil finding its way into your process — see our guide to the types of vacuum pump for how dry pumps compare.
How does a claw vacuum pump work?
A claw pump uses two claw-shaped rotors that turn in opposite directions without ever touching each other or the housing. Nothing rubs, so there are no vanes to wear and no oil in the pumping chamber – which means low maintenance, clean dry air and steady performance under continuous industrial duty.
What is the DVP VB 315 used for?
DVP’s datasheet for the VB 315 does not list specific applications. Pumps in DVP’s claw pump range are used across vacuum packaging, handling and lifting, printing, laboratory and general industrial vacuum duties. If you tell us the process, volume and target pressure, we will confirm whether the VB 315 is the right choice.
DVP VB 315 technical specifications
| Nominal capacity (pumping speed) | 315 m³/h (50 Hz) / 380 m³/h (60 Hz) |
|---|---|
| Ultimate pressure (absolute) | 150 mbar |
| Motor power | 5.5 kW at 50 Hz / 6.6 kW at 60 Hz |
| Noise level (UNI EN ISO 2151, K 3 dB) | 71 dB(A) at 50 Hz / 74 dB(A) at 60 Hz |
| Weight | 305 kg |
| Pump type | Dry claw |
| DVP part number | 9816004 |
| Manufacturer | DVP Vacuum Technology |
Figures are taken from DVP’s published datasheet for the VB 315 (part number 9816004). Noise is measured to UNI EN ISO 2151. Need the pumping speed at your actual working pressure rather than the nominal figure? Ask us for the curve.
DVP VB 315 supply, spares and servicing from Girovac
Established in 1983, with more than 40 years in the industrial vacuum sector, Girovac supplies, services and stocks spares for DVP vacuum pumps from our workshop in North Walsham, Norfolk. We can supply the VB 315 new, source genuine DVP spares, and repair, service or recondition DVP pumps.
With no oil to manage, routine care comes down to keeping the inlet filter clear and replacing the vanes at the end of their life. If a dry pump is losing pumping speed, worn vanes or a blocked filter are the usual causes. See our DVP vacuum pump service guide.
We do not list prices online. Every VB 315 is quoted to your application, duty cycle and phase requirement, including delivery to anywhere in the UK. Contact us for a quote on price, availability and technical advice.
Frequently asked questions
What vacuum does the DVP VB 315 reach?
The VB 315 reaches an ultimate pressure of 150 mbar absolute, with a nominal pumping speed of 315 m³/h (50 Hz) / 380 m³/h (60 Hz).
Does the DVP VB 315 need oil?
No. The VB 315 is a dry-running pump — it uses no oil at all, so there is no oil to check, top up or change, and no oil mist at the exhaust. Servicing centres on the vanes and filters instead.
What motor does the DVP VB 315 have?
The VB 315 is rated at 5.5 kW at 50 Hz / 6.6 kW at 60 Hz and weighs 305 kg. Tell us whether you need single-phase or three-phase when you enquire.
How much does the DVP VB 315 cost?
Girovac quotes the VB 315 on application rather than listing a price, because cost depends on phase, accessories and delivery. Contact us and we will come back with a firm price and lead time.
Can Girovac service or repair a DVP VB 315?
Yes. Established in 1983, with more than 40 years in the industrial vacuum sector, Girovac supplies, services and stocks spares for DVP vacuum pumps from our workshop in North Walsham, Norfolk. We service, repair and recondition DVP pumps including the VB 315, and stock genuine spares.
DVP VB 315 claw vacuum pump — 315 m³/h dry claw vacuum pump, ultimate 150 mbar. UK supply, genuine spares & servicing from Girovac. Price on application.
