DVP
DVP PA 155 Dry Claw Vacuum Pump
- Nominal pumping capacity
- 155 / 186 m³/h (50 / 60 Hz)
- End / ultimate pressure
- 150 mbar — absolute
- Motor power
- 3.0 / 3.6 kW (50 / 60 Hz; three-phase)
DVP brand guide / Product family
DVP PA & VB dry claw pumps
Dry claw vacuum pumps with different capacity and operating-pressure specifications.
Dry claw vacuum selection
PA and VB claw models have different capacity and operating-pressure specifications. A dry pumping chamber still needs a suitable gas path, inlet protection and attention to drive lubrication. Compare the working duty, allowable inlet pressure, motor and exhaust installation. Do not use a compressor rating to size a vacuum pump.
What to check when selecting this range
The pumping chamber runs dry, while drive components have separate lubrication requirements. Compare working pressure rather than the model number alone.
Compare the listed models
Compare values with their stated gas, frequency and configuration conditions. A blank specification means it needs confirmation. Listed equipment is subject to a quotation; inclusion here does not indicate stock.
| Model | Nominal pumping capacity | End / ultimate pressure | Inlet / outlet connections | Motor power |
|---|---|---|---|---|
| DVP PA 155 Dry Claw Vacuum Pump | 155 / 186 m³/h (50 / 60 Hz) | 150 mbar — absolute | 1½ inch G / 1 inch G | 3.0 / 3.6 kW (50 / 60 Hz; three-phase) |
| DVP PA 315 Dry Claw Vacuum Pump | 250 / 300 m³/h (50 / 60 Hz) | 200 mbar — absolute | 2 inch G / 1¼ inch G | 5.5 / 6.6 kW (50 / 60 Hz; three-phase) |
| DVP VB 315 Claw Vacuum Pump | 315 m³/h (50 Hz) / 380 m³/h (60 Hz) | 150 mbar — absolute | Confirm for this model | 5.5 kW at 50 Hz / 6.6 kW at 60 Hz |
Models and configurations
DVP
DVP PA 315 Dry Claw Vacuum Pump
- Nominal pumping capacity
- 250 / 300 m³/h (50 / 60 Hz)
- End / ultimate pressure
- 200 mbar — absolute
- Motor power
- 5.5 / 6.6 kW (50 / 60 Hz; three-phase)
DVP
DVP VB 315 Claw Vacuum Pump
- Nominal pumping capacity
- 315 m³/h (50 Hz) / 380 m³/h (60 Hz)
- End / ultimate pressure
- 150 mbar — absolute
- Motor power
- 5.5 kW at 50 Hz / 6.6 kW at 60 Hz
Documentation and specification checks
Open the model page for its specifications and available manufacturer downloads. Match the full model, suffix and revision to the equipment being supplied. Keep installation limits and performance test conditions with the figure when comparing alternatives.
Compare equipment across manufacturers
Related DVP families
- DVP SC & SB dry rotary vane pumps
- DVP LC & MD oil-lubricated pumps
- DVP LC WR water-resistant pumps
- DVP LC Kzero pumps
- DVP LC HV variants
- DVP ZA oil-free piston pumps
- DVP RD, RC, DB & DC rotary vane pumps
- DVP ATEX model selection
- DVP CB, CC & VA compressors
- DVP TSL side channel blowers
- DVP BCA boosters & CBL packages
- DVP CPA, CPAP, CPV & XC systems
Return to the DVP brand guide · Explore all product families
Specify your DVP equipment
Send the process, working pressure, gas, required capacity and electrical supply. For measurement, include the range, connection, output and controller. We can confirm the model, accessories and documentation for your quotation.
Compare selected equipment
Compare the stated conditions as well as the values. A missing specification is not a zero rating; confirm suitability with Girovac.