DVP LC 106 Lubricated Rotary Vane Vacuum Pump
The DVP LC 106 is a single-stage, oil-lubricated rotary vane vacuum pump from DVP Vacuum Technology. It pumps 106 m³/h and reaches an ultimate pressure of 0.1 mbar absolute. Girovac supplies the LC 106 in the UK, stocks genuine DVP spares and oil, and services DVP pumps in-house. Price on application.
DVP LC 106 at a glance
| Pumping speed | 106 m³/h (50 Hz) / 127 m³/h (60 Hz) |
|---|---|
| Ultimate pressure | 0.1 mbar |
| Motor power | 2.2 kW (three-phase, IE2) at 50 Hz |
| Weight | 70.5 kg |
| Oil type | DVP SW100 |
| Price | On application |
What is the DVP LC 106?
The LC 106 is part of DVP’s LC range — 106 m³/h, ultimate 0.1 mbar, IE2 three-phase motor. Oil-sealed rotary vane pumps like this one are the workhorses of industrial vacuum: the oil seals the clearances, lubricates the vanes and carries away heat, which is what lets a single-stage rotary vane pump hold a steady working vacuum under continuous duty.
Standard equipment on the DVP LC 106
- Oil check valve
- Exhaust mist eliminator
- Automatic floating oil recovery valve
- Gas ballast with manual cut-off valve
- Shock mounts fitted as standard
- Oil filter with by-pass
What is the DVP LC 106 used for?
DVP lists the following applications for the LC 106:
- Metal polishing machines and vacuum welding of precious metals
- Packing, packaging and vacuum bottling machines
- Glass and marble lifting systems
- Loading, paper feeding and labelling equipment
- Suction handling equipment and automatic machines
- Vacuum-packed food processing and mixing
- Vacuum thermal moulding
- Garage equipment
- Centralised vacuum plant installations
DVP LC 106 technical specifications
| Nominal capacity (pumping speed) | 106 m³/h (50 Hz) / 127 m³/h (60 Hz) |
|---|---|
| Ultimate pressure (absolute, gas ballast closed) | 0.1 mbar |
| Continuous-duty working range | 400 to 0.1 mbar (abs) |
| Max. inlet pressure for water vapour (gas ballast open) | 11 mbar |
| Max. water-vapour pumping rate (gas ballast open) | 1 kg/h |
| Motor power | 2.2 kW (three-phase, IE2) at 50 Hz |
| Nominal speed | 1400 rpm (50 Hz) / 1700 rpm (60 Hz) |
| Noise level (UNI EN ISO 2151, K 3 dB) | 66 dB(A) at 50 Hz / 68 dB(A) at 60 Hz |
| Weight | 70.5 kg |
| Oil type | DVP SW100 |
| Oil quantity | 2–3 dm³ |
| Pump intake / outlet | 1-1/2″G / 1-1/4″G |
| Operating temperature @ 20 °C | 75–80 °C (50 Hz) / 80–85 °C (60 Hz) |
| Pump type | Single-stage, oil-lubricated rotary vane |
| DVP part number | 9603032 |
| Manufacturer | DVP Vacuum Technology |
Figures are taken from DVP’s published datasheet for the LC 106 (part number 9603032). Noise is measured to UNI EN ISO 2151. Need the pumping speed at your actual working pressure rather than the nominal figure? Ask us for the curve.
How does the DVP LC 106 compare with the rest of the LC range?
The closest alternatives by pumping speed are the DVP LC 60 and DVP LC 151. If you are between sizes, size on the volume to be evacuated and the time you have to do it in, not on the nominal figure alone.
| DVP LC 106 (this pump) | 106 m³/h (50 Hz) / 127 m³/h (60 Hz) · ultimate 0.1 mbar |
|---|---|
| DVP LC 60 | 60 m³/h (50 Hz) / 72 m³/h (60 Hz) · ultimate 0.1 mbar |
| DVP LC 151 | 151 m³/h (50 Hz) / 181 m³/h (60 Hz) · ultimate 0.1 mbar |
See the full DVP pump range or read our guide to the types of vacuum pump.
DVP LC 106 supply, spares and servicing from Girovac
Established in 1983, with more than 40 years in the industrial vacuum sector, Girovac supplies, services and stocks spares for DVP vacuum pumps from our workshop in North Walsham, Norfolk. We can supply the LC 106 new, source genuine DVP spares, and repair, service or recondition DVP pumps. If you are pumping water vapour, use the gas ballast — it is what stops vapour condensing in the oil.
Routine care is straightforward: keep the oil clean and topped up, change it on schedule, and keep the inlet filter clear. Most cases of a not reaching ultimate vacuum come down to tired oil or a leak rather than a worn pump. See our DVP vacuum pump service guide for the full routine.
We do not list prices online. Every LC 106 is quoted to your application, duty cycle and phase requirement, including delivery to anywhere in the UK. Contact us for a quote on price, availability and technical advice.
Frequently asked questions
What is the DVP LC 106 used for?
DVP lists the LC 106 for metal polishing machines and vacuum welding of precious metals, packing, packaging and vacuum bottling machines, glass and marble lifting systems, loading, paper feeding and labelling equipment, suction handling equipment and automatic machines, vacuum-packed food processing and mixing, vacuum thermal moulding, garage equipment and centralised vacuum plant installations.
What vacuum does the DVP LC 106 reach?
The LC 106 reaches an ultimate pressure of 0.1 mbar absolute, operating continuously across 400 to 0.1 mbar (abs), with a nominal pumping speed of 106 m³/h (50 Hz) / 127 m³/h (60 Hz).
What oil does the DVP LC 106 take?
The LC 106 uses DVP SW100 rotary vane pump oil, with a charge of 2–3 dm³. Change it when it darkens or the achievable vacuum drops off. Girovac stocks genuine DVP oil.
Is the DVP LC 106 single-stage or two-stage?
The LC 106 is a single-stage, oil-lubricated (oil-sealed) rotary vane vacuum pump. Single-stage pumps of this type typically reach the 10⁻¹ mbar region; for deeper vacuum you would need a two-stage pump.
What motor does the DVP LC 106 have?
The LC 106 is rated at 2.2 kW (three-phase, IE2) at 50 Hz and weighs 70.5 kg. Tell us whether you need single-phase or three-phase when you enquire.
How much does the DVP LC 106 cost?
Girovac quotes the LC 106 on application rather than listing a price, because cost depends on phase, accessories and delivery. Contact us and we will come back with a firm price and lead time.
Can Girovac service or repair a DVP LC 106?
Yes. Established in 1983, with more than 40 years in the industrial vacuum sector, Girovac supplies, services and stocks spares for DVP vacuum pumps from our workshop in North Walsham, Norfolk. We service, repair and recondition DVP pumps including the LC 106, and stock genuine spares.
DVP LC 106 single-stage rotary vane vacuum pump — 106 m³/h, ultimate 0.1 mbar, IE2 three-phase motor. UK supply, genuine spares & servicing from Girovac. Price on application.
Related products
-
MIL'SEVISA 350.R
With a Nominal Pumping Speed of 360M³/Hr @ 50Hz, ...
Brand: MIL'S View Details -
MIL'SEVISA E150.R
With a Nominal Pumping Speed of 132M³/Hr @ 50Hz, ...
Brand: MIL'S View Details -
DVPDVP LC 2 Lubricated Rotary Vane Vacuum Pump
DVP LC 2 single-stage rotary vane vacuum pump — 2 ...
Brand: DVP View Details -
DVPGVPSV4
With a Nominal Pumping Speed of 4M³/Hr @ 50Hz, ...
Brand: DVP View Details