DVP LC 61 Lubricated Rotary Vane Vacuum Pump
The DVP LC 61 is a single-stage, oil-lubricated rotary vane vacuum pump from DVP Vacuum Technology. It pumps 60 m³/h and reaches an ultimate pressure of 0.1 mbar absolute. Girovac supplies the LC 61 in the UK, stocks genuine DVP spares and oil, and services DVP pumps in-house. Price on application.
DVP LC 61 at a glance
| Pumping speed | 60 m³/h (50 Hz) / 72 m³/h (60 Hz) |
|---|---|
| Ultimate pressure | 0.1 mbar |
| Motor power | 1.5 kW (single-phase) / 1.5 kW (three-phase, IE3) at 50 Hz |
| Weight | 45 kg |
| Oil type | DVP SW60 |
| Price | On application |
What is the DVP LC 61?
The LC 61 is part of DVP’s LC range — 60 m³/h, ultimate 0.1 mbar, selectable gas ballast. Oil-sealed rotary vane pumps like this one are the workhorses of industrial vacuum: the oil seals the clearances, lubricates the vanes and carries away heat, which is what lets a single-stage rotary vane pump hold a steady working vacuum under continuous duty.
What is the DVP LC 61 used for?
DVP’s datasheet for the LC 61 does not list specific applications. Pumps in DVP’s LC range are used across vacuum packaging, handling and lifting, printing, laboratory and general industrial vacuum duties. If you tell us the process, volume and target pressure, we will confirm whether the LC 61 is the right choice.
DVP LC 61 technical specifications
| Nominal capacity (pumping speed) | 60 m³/h (50 Hz) / 72 m³/h (60 Hz) |
|---|---|
| Ultimate pressure (absolute, gas ballast closed) | 0.1 mbar |
| Ultimate pressure (absolute, gas ballast open) | 0.5 mbar |
| Continuous-duty working range | 400 to 0.1 mbar (abs) |
| Max. water-vapour pumping rate (gas ballast open) | 0.7 kg/h |
| Maximum inlet air temperature | 40 °C |
| Motor power | 1.5 kW (single-phase) / 1.5 kW (three-phase, IE3) at 50 Hz |
| Nominal speed | 1400 rpm (50 Hz) / 1700 rpm (60 Hz) |
| Noise level (UNI EN ISO 2151, K 3 dB) | 66 dB(A) at 50 Hz / 68 dB(A) at 60 Hz |
| Weight | 45 kg |
| Oil type | DVP SW60 |
| Oil quantity | 1.5–2 dm³ |
| Pump type | Single-stage, oil-lubricated rotary vane |
| DVP part number | 9601079 |
| Manufacturer | DVP Vacuum Technology |
Figures are taken from DVP’s published datasheet for the LC 61 (part number 9601079). Noise is measured to UNI EN ISO 2151. Need the pumping speed at your actual working pressure rather than the nominal figure? Ask us for the curve.
How does the DVP LC 61 compare with the rest of the LC range?
The closest alternatives by pumping speed are the DVP LC 40 and DVP LC 60. If you are between sizes, size on the volume to be evacuated and the time you have to do it in, not on the nominal figure alone.
| DVP LC 61 (this pump) | 60 m³/h (50 Hz) / 72 m³/h (60 Hz) · ultimate 0.1 mbar |
|---|---|
| DVP LC 40 | 40 m³/h (50 Hz) / 48 m³/h (60 Hz) · ultimate 0.1 mbar |
| DVP LC 60 | 60 m³/h (50 Hz) / 72 m³/h (60 Hz) · ultimate 0.1 mbar |
See the full DVP pump range or read our guide to the types of vacuum pump.
DVP LC 61 supply, spares and servicing from Girovac
Established in 1983, with more than 40 years in the industrial vacuum sector, Girovac supplies, services and stocks spares for DVP vacuum pumps from our workshop in North Walsham, Norfolk. We can supply the LC 61 new, source genuine DVP spares, and repair, service or recondition DVP pumps. If you are pumping water vapour, use the gas ballast — it is what stops vapour condensing in the oil.
Routine care is straightforward: keep the oil clean and topped up, change it on schedule, and keep the inlet filter clear. Most cases of a not reaching ultimate vacuum come down to tired oil or a leak rather than a worn pump. See our DVP vacuum pump service guide for the full routine.
We do not list prices online. Every LC 61 is quoted to your application, duty cycle and phase requirement, including delivery to anywhere in the UK. Contact us for a quote on price, availability and technical advice.
Frequently asked questions
What vacuum does the DVP LC 61 reach?
The LC 61 reaches an ultimate pressure of 0.1 mbar absolute, operating continuously across 400 to 0.1 mbar (abs), with a nominal pumping speed of 60 m³/h (50 Hz) / 72 m³/h (60 Hz).
What oil does the DVP LC 61 take?
The LC 61 uses DVP SW60 rotary vane pump oil, with a charge of 1.5–2 dm³. Change it when it darkens or the achievable vacuum drops off. Girovac stocks genuine DVP oil.
Is the DVP LC 61 single-stage or two-stage?
The LC 61 is a single-stage, oil-lubricated (oil-sealed) rotary vane vacuum pump. Single-stage pumps of this type typically reach the 10⁻¹ mbar region; for deeper vacuum you would need a two-stage pump.
What motor does the DVP LC 61 have?
The LC 61 is rated at 1.5 kW (single-phase) / 1.5 kW (three-phase, IE3) at 50 Hz and weighs 45 kg. Tell us whether you need single-phase or three-phase when you enquire.
How much does the DVP LC 61 cost?
Girovac quotes the LC 61 on application rather than listing a price, because cost depends on phase, accessories and delivery. Contact us and we will come back with a firm price and lead time.
Can Girovac service or repair a DVP LC 61?
Yes. Established in 1983, with more than 40 years in the industrial vacuum sector, Girovac supplies, services and stocks spares for DVP vacuum pumps from our workshop in North Walsham, Norfolk. We service, repair and recondition DVP pumps including the LC 61, and stock genuine spares.
DVP LC 61 single-stage rotary vane vacuum pump — 60 m³/h, ultimate 0.1 mbar, selectable gas ballast. UK supply, genuine spares & servicing from Girovac. Price on application.
Related products
-
MIL'SEVISA E25.2 HV
With a Nominal Pumping Speed of 30M³/Hr @ 50Hz ...
Brand: MIL'S View Details -
DVPDVP LC 25 Lubricated Rotary Vane Vacuum Pump
DVP LC 25 single-stage rotary vane vacuum pump — ...
Brand: DVP View Details -
MIL'SEVISA ATEX
EVISA ATEX Classification For gases 2G IIB T4 for dust ...
Brand: MIL'S View Details -
MIL'SEVISA E100.R
With a Nominal Pumping Speed of 100M³/Hr @ 50Hz, ...
Brand: MIL'S View Details