DVP LC 12CC Lubricated Rotary Vane Vacuum Pump

The DVP LC 12CC is a single-stage, oil-lubricated rotary vane vacuum pump from DVP Vacuum Technology. It pumps 12 m³/h and reaches an ultimate pressure of 2 mbar absolute. Girovac supplies the LC 12CC in the UK, stocks genuine DVP spares and oil, and services DVP pumps in-house. Price on application.

DVP LC 12CC at a glance

What is the DVP LC 12CC?

The LC 12CC is part of DVP’s LC range — 12 m³/h at 12 or 24 VDC, ultimate 2 mbar. Oil-sealed rotary vane pumps like this one are the workhorses of industrial vacuum: the oil seals the clearances, lubricates the vanes and carries away heat, which is what lets a single-stage rotary vane pump hold a steady working vacuum under continuous duty.

Standard equipment on the DVP LC 12CC

• Oil check valve
• Exhaust mist eliminator
• Floating oil recovery valve
• Continuously working gas ballast

What is the DVP LC 12CC used for?

DVP’s datasheet for the LC 12CC does not list specific applications. Pumps in DVP’s LC range are used across vacuum packaging, handling and lifting, printing, laboratory and general industrial vacuum duties. If you tell us the process, volume and target pressure, we will confirm whether the LC 12CC is the right choice.

DVP LC 12CC technical specifications

Figures are taken from DVP’s published datasheet for the LC 12CC (part number 9605008). Noise is measured to UNI EN ISO 2151. Need the pumping speed at your actual working pressure rather than the nominal figure? Ask us for the curve.

How does the DVP LC 12CC compare with the rest of the LC range?

The closest alternatives by pumping speed are the DVP LC 8 and DVP LC 12. If you are between sizes, size on the volume to be evacuated and the time you have to do it in, not on the nominal figure alone.

See the full DVP pump range or read our guide to the types of vacuum pump.

Accessories and spares for the DVP LC 12CC

We stock genuine DVP consumables — inlet filters, exhaust filters, vanes, oil and service kits. DVP part numbers above are from the LC 12CC datasheet; quote them when you enquire and we will match them exactly.

DVP LC 12CC supply, spares and servicing from Girovac

Established in 1983, with more than 40 years in the industrial vacuum sector, Girovac supplies, services and stocks spares for DVP vacuum pumps from our workshop in North Walsham, Norfolk. We can supply the LC 12CC new, source genuine DVP spares, and repair, service or recondition DVP pumps. If you are pumping water vapour, use the gas ballast — it is what stops vapour condensing in the oil.

Routine care is straightforward: keep the oil clean and topped up, change it on schedule, and keep the inlet filter clear. Most cases of a not reaching ultimate vacuum come down to tired oil or a leak rather than a worn pump. See our DVP vacuum pump service guide for the full routine.

We do not list prices online. Every LC 12CC is quoted to your application, duty cycle and phase requirement, including delivery to anywhere in the UK. Contact us for a quote on price, availability and technical advice.

Frequently asked questions

What vacuum does the DVP LC 12CC reach?

The LC 12CC reaches an ultimate pressure of 2 mbar absolute, operating continuously across 400 to 2 mbar (abs), with a nominal pumping speed of 12 m³/h.

What oil does the DVP LC 12CC take?

The LC 12CC uses DVP SW40 rotary vane pump oil, with a charge of 0.30–0.40 dm³. Change it when it darkens or the achievable vacuum drops off. Girovac stocks genuine DVP oil.

Is the DVP LC 12CC single-stage or two-stage?

The LC 12CC is a single-stage, oil-lubricated (oil-sealed) rotary vane vacuum pump. Single-stage pumps of this type typically reach the 10⁻¹ mbar region; for deeper vacuum you would need a two-stage pump.

What motor does the DVP LC 12CC have?

The LC 12CC is rated at 0.45 kW and weighs 14 kg. Tell us whether you need single-phase or three-phase when you enquire.

How much does the DVP LC 12CC cost?

Girovac quotes the LC 12CC on application rather than listing a price, because cost depends on phase, accessories and delivery. Contact us and we will come back with a firm price and lead time.

Can Girovac service or repair a DVP LC 12CC?

Yes. Established in 1983, with more than 40 years in the industrial vacuum sector, Girovac supplies, services and stocks spares for DVP vacuum pumps from our workshop in North Walsham, Norfolk. We service, repair and recondition DVP pumps including the LC 12CC, and stock genuine spares.

Enquire for Pricing and Availability

Or

Add to Quote

View Basket
Remove from Basket

View Basket
Remove from Basket