DVP LC 40 Lubricated Rotary Vane Vacuum Pump

Product details

The DVP LC 40 is a single-stage, oil-lubricated rotary vane vacuum pump from DVP Vacuum Technology. It pumps 40 m³/h and reaches an ultimate pressure of 0.1 mbar absolute. Girovac supplies the LC 40 in the UK, stocks genuine DVP spares and oil, and services DVP pumps in-house. Price on application.

DVP LC 40 at a glance

What is the DVP LC 40?

The LC 40 is part of DVP’s LC range — 40 m³/h, ultimate 0.1 mbar, oil filter with by-pass and manual gas ballast. Oil-sealed rotary vane pumps like this one are the workhorses of industrial vacuum: the oil seals the clearances, lubricates the vanes and carries away heat, which is what lets a single-stage rotary vane pump hold a steady working vacuum under continuous duty.

Standard equipment on the DVP LC 40

• Oil check valve
• Exhaust mist eliminator
• Automatic floating oil recovery valve
• Gas ballast with manual cut-off valve
• Shock mounts fitted as standard
• Oil filter with by-pass

What is the DVP LC 40 used for?

DVP lists the following applications for the LC 40:

• Metal polishing machines and vacuum welding of precious metals
• Packing, packaging and vacuum bottling machines
• Glass and marble lifting systems
• Loading, paper feeding and labelling equipment
• Suction handling equipment and automatic machines
• Vacuum-packed food processing and mixing
• Vacuum thermal moulding
• Garage equipment
• Centralised vacuum plant installations

DVP LC 40 technical specifications

Figures are taken from DVP’s published datasheet for the LC 40 (part number 9601067). Noise is measured to UNI EN ISO 2151. Need the pumping speed at your actual working pressure rather than the nominal figure? Ask us for the curve.

How does the DVP LC 40 compare with the rest of the LC range?

The closest alternatives by pumping speed are the DVP LC 20 and DVP LC 41. If you are between sizes, size on the volume to be evacuated and the time you have to do it in, not on the nominal figure alone.

See the full DVP pump range or read our guide to the types of vacuum pump.

Accessories and spares for the DVP LC 40

We stock genuine DVP consumables — inlet filters, exhaust filters, vanes, oil and service kits. DVP part numbers above are from the LC 40 datasheet; quote them when you enquire and we will match them exactly.

DVP LC 40 supply, spares and servicing from Girovac

Established in 1983, with more than 40 years in the industrial vacuum sector, Girovac supplies, services and stocks spares for DVP vacuum pumps from our workshop in North Walsham, Norfolk. We can supply the LC 40 new, source genuine DVP spares, and repair, service or recondition DVP pumps. If you are pumping water vapour, use the gas ballast — it is what stops vapour condensing in the oil.

Routine care is straightforward: keep the oil clean and topped up, change it on schedule, and keep the inlet filter clear. Most cases of a not reaching ultimate vacuum come down to tired oil or a leak rather than a worn pump. See our DVP vacuum pump service guide for the full routine.

We do not list prices online. Every LC 40 is quoted to your application, duty cycle and phase requirement, including delivery to anywhere in the UK. Contact us for a quote on price, availability and technical advice.

Frequently asked questions

What is the DVP LC 40 used for?

DVP lists the LC 40 for metal polishing machines and vacuum welding of precious metals, packing, packaging and vacuum bottling machines, glass and marble lifting systems, loading, paper feeding and labelling equipment, suction handling equipment and automatic machines, vacuum-packed food processing and mixing, vacuum thermal moulding, garage equipment and centralised vacuum plant installations.

What vacuum does the DVP LC 40 reach?

The LC 40 reaches an ultimate pressure of 0.1 mbar absolute, operating continuously across 400 to 0.1 mbar (abs), with a nominal pumping speed of 40 m³/h (50 Hz) / 48 m³/h (60 Hz).

What oil does the DVP LC 40 take?

The LC 40 uses DVP SW60 rotary vane pump oil, with a charge of 1–1.5 dm³. Change it when it darkens or the achievable vacuum drops off. Girovac stocks genuine DVP oil.

Is the DVP LC 40 single-stage or two-stage?

The LC 40 is a single-stage, oil-lubricated (oil-sealed) rotary vane vacuum pump. Single-stage pumps of this type typically reach the 10⁻¹ mbar region; for deeper vacuum you would need a two-stage pump.

What motor does the DVP LC 40 have?

The LC 40 is rated at 1.1 kW (single-phase) / 1.1 kW (three-phase) at 50 Hz and weighs 46.5 kg (single-phase) / 42 kg (three-phase). Tell us whether you need single-phase or three-phase when you enquire.

How much does the DVP LC 40 cost?

Girovac quotes the LC 40 on application rather than listing a price, because cost depends on phase, accessories and delivery. Contact us and we will come back with a firm price and lead time.

Can Girovac service or repair a DVP LC 40?

Yes. Established in 1983, with more than 40 years in the industrial vacuum sector, Girovac supplies, services and stocks spares for DVP vacuum pumps from our workshop in North Walsham, Norfolk. We service, repair and recondition DVP pumps including the LC 40, and stock genuine spares.