The DVP LC 151WR is a water-resistant vacuum pump. The documented capacity is 151 / 181 m³/h (50 / 60 Hz). Total final pressure is 4 mbar. Ask Girovac to match the configuration to your duty and electrical supply.
Tell us the configuration and quantity you need. Include your process requirements if you would like help with selection.
View quote listThe DVP LC 151WR is a water-resistant vacuum pump. The documented capacity is 151 / 181 m³/h (50 / 60 Hz). Total final pressure is 4 mbar. Ask Girovac to match the configuration to your duty and electrical supply.
For vapour duties, tell us the vapour, temperature, loading rate and operating cycle. Water-resistant construction has defined limits: liquid separation, gas ballast and oil condition remain important. The gas-ballast setting can change the attainable pressure.
Water-resistant lubricated variant for specified vapour duty. WR does not mean that the pump can ingest unrestricted liquid; discuss separation and condensate management.
| Specification | Manufacturer data |
|---|---|
| Model | DVP LC 151WR |
| Nominal pumping capacity | 151 / 181 m³/h (50 / 60 Hz) |
| Total final pressure (absolute) | 4 mbar |
| Motor power | 3.3 / 3.7 kW (50 / 60 Hz; three-phase) |
| Lubricant | DVP SW100 (BV100) |
| Continuous operating pressure range (absolute) | 400–4 mbar |
| Inlet / outlet connections | 1½ inch G / 1¼ inch G |
Values apply to the stated model and conditions. Where two figures are shown, follow the 50 / 60 Hz order in the label. Confirm the motor, connections and supplied accessories in your quotation.
Download the original DVP LC 151WR datasheet (PDF). The original document includes its revision information and any additional model-specific conditions.
Compare DVP LC 106WR. Check the working pressure, capacity and motor rather than choosing by the model number alone. Browse the full DVP range.
For suitable rough-vacuum duties, compare industrial vacuum dial gauges. Where a display, output or control signal is needed, review digital vacuum meters and vacuum transducers. Measure at the chamber or point of use when that is the pressure your process depends on. Gauge calibration can be specified around the operating range and required test points.
Use the complete model, serial number and manufacturer oil specification. This datasheet specifies DVP SW100 (BV100). Different suffixes and gear compartments can require different lubricants. See vacuum oils and greases and send the nameplate details when requesting parts.
Send the model, required flow at working pressure, gas or vapour, operating hours, electrical supply and any installation restrictions. For a replacement, include a nameplate photograph. We will confirm the proposed configuration, price and lead time before ordering.
Discuss the complete duty when reviewing industrial vacuum systems. A central installation also needs matched controls, filtration, pipework and pressure measurement; pump capacity alone is not the system specification.
Call 01692 660 117 or use the product enquiry form. Give us the model and working conditions so we can check the equipment and supporting accessories together.
| Manufacturer | DVP |
|---|---|
| Equipment type | Single Stage Oil Filled Pumps |
| Nominal pumping capacity | 151 / 181 m³/h (50 / 60 Hz) |
| End / ultimate pressure | 4 mbar — absolute |
| Inlet / outlet connections | 1½ inch G / 1¼ inch G |
| Motor power | 3.3 / 3.7 kW (50 / 60 Hz; three-phase) |
| Lubricant | DVP SW100 (BV100) |
| Model | LC 151WR |
| Continuous operating pressure range (absolute) | 400–4 mbar |
Send the pump model and part number when asking about a replacement. Compatibility depends on the equipment and operating conditions.
Confirm the exact version, electrical supply and connections. Ask whether oil, filters, fittings, cables or controllers are included or separately specified.
Availability, lead time and the applicable warranty are confirmed for your quotation. A catalogue listing does not reserve stock.
What to check in your quotation · Delivery · Returns and faults
DVP LC 151WR Water-resistant Vacuum Pump
Prefer to talk? 01692 660 117 · [email protected]
We use your details to respond to your enquiry. Read our privacy policy.
MIL'S
DVP
With a Nominal Pumping Speed of 4M³/Hr @ 50Hz, 5M³/Hr @ 60Hz The GVPSV4 were specifically designed for the AC/R sector and for Laboratory…
View specifications
MIL'S
MIL'S
Compare the stated conditions as well as the values. A missing specification is not a zero rating; confirm suitability with Girovac.
Copyright © 2026 Girovac Ltd | Registered in England and Wales Number: 01758137 | Cookie Policy | Privacy Policy | Delivered by Postino
