EDWARDS
Edwards D-LAB 10-8 Diaphragm Vacuum Pump
- Nominal pumping capacity
- 0.6 m³/h (10 l/min, published) at 50 Hz
- End / ultimate pressure
- 8 mbar at 50 Hz
- Motor power
- 90 W
EDWARDS brand guide / Product family
Edwards XDD1 and D-LAB Diaphragm Vacuum Pumps
Choose around gas compatibility and pressure
XDD1 is intended for non-aggressive gases and can back a compatible small compound turbomolecular pump. D-LAB uses chemically resistant wetted materials for laboratory processes. Neither label replaces a review of the actual gases, vapours and installation.
| Specification | Details |
|---|---|
| XDD1 AC | 1.2 m³/h at 50 Hz; typical ultimate <2 mbar; NW16 |
| XDD1 DC | 1.4 m³/h at factory 1700 rpm; typical ultimate <2 mbar; 24 V DC |
| D-LAB 10-8 | 0.6 m³/h; ultimate 8 mbar at 50 Hz |
| D-LAB 20-8 | 1.2 m³/h; ultimate 8 mbar at 50 Hz |
| D-LAB 34-8 | 2 m³/h; ultimate 8 mbar at 50 Hz |
Specify more than the pump
Confirm mains or DC supply, inlet and exhaust fittings, separator or condenser, and any controller. UK mains cables are separate selections: XDD1 A50516000; D-LAB A50505000. Check every accessory against the exact pump version. Photographs on the product pages identify where a shared family image is used.
Laboratory selection and support
Laboratory vacuum systems · Drying and degassing · Wet-gas and vapour handling · Complete T-Station pumping stations · Replacement parts and service kits
Compare the listed models
Compare values with their stated gas, frequency and configuration conditions. A blank specification means it needs confirmation. Listed equipment is subject to a quotation; inclusion here does not indicate stock.
| Model | Nominal pumping capacity | End / ultimate pressure | Inlet / outlet connections |
|---|---|---|---|
| Edwards D-LAB 10-8 Diaphragm Vacuum Pump | 0.6 m³/h (10 l/min, published) at 50 Hz | 8 mbar at 50 Hz | Hose nozzles for 9 mm internal-diameter hose |
| Edwards D-LAB 20-8 Diaphragm Vacuum Pump | 1.2 m³/h (20 l/min, published) at 50 Hz | 8 mbar at 50 Hz | Hose nozzles for 9 mm internal-diameter hose |
| Edwards D-LAB 34-8 Diaphragm Vacuum Pump | 2 m³/h (34 l/min, published) at 50 Hz | 8 mbar at 50 Hz | Hose nozzles for 9 mm internal-diameter hose |
| Edwards XDD1 Diaphragm Vacuum Pump | 1.2 m³/h (AC, 50 Hz) | <2 mbar (typical) | NW16 inlet; exhaust silencer or 1/8-inch BSP |
Models and configurations
EDWARDS
Edwards D-LAB 20-8 Diaphragm Vacuum Pump
- Nominal pumping capacity
- 1.2 m³/h (20 l/min, published) at 50 Hz
- End / ultimate pressure
- 8 mbar at 50 Hz
- Motor power
- 120 W
EDWARDS
Edwards D-LAB 34-8 Diaphragm Vacuum Pump
- Nominal pumping capacity
- 2 m³/h (34 l/min, published) at 50 Hz
- End / ultimate pressure
- 8 mbar at 50 Hz
- Motor power
- 245 W
EDWARDS
Edwards XDD1 Diaphragm Vacuum Pump
- Nominal pumping capacity
- 1.2 m³/h (AC, 50 Hz)
- End / ultimate pressure
- <2 mbar (typical)
- Inlet / outlet connections
- NW16 inlet; exhaust silencer or 1/8-inch BSP
Documentation and specification checks
Open the model page for its specifications and available manufacturer downloads. Match the full model, suffix and revision to the equipment being supplied. Keep installation limits and performance test conditions with the figure when comparing alternatives.
Compare equipment across manufacturers
Medium Vacuum Pump · Dry Vacuum Pumps · Diaphragm Vacuum Pumps
Related EDWARDS families
- Edwards nEXT turbomolecular pumps
- Edwards Pump and booster combinations
- Edwards RV rotary vane pumps
- Edwards E-series rotary vane pumps
- Edwards E2S5 and E2S12 two-stage rotary vane pumps
- Edwards nXDS dry scroll vacuum pumps
- Edwards mXDS compact dry scroll pumps
- Edwards nXRi dry multistage Roots pumps
- Edwards T-Station turbomolecular pumping stations
- Edwards APG200, AIM200 and WRG200 vacuum gauges
- Edwards TIC, ADC and TAG vacuum controllers
Return to the EDWARDS brand guide · Explore all product families
Specify your EDWARDS equipment
Send the process, working pressure, gas, required capacity and electrical supply. For measurement, include the range, connection, output and controller. We can confirm the model, accessories and documentation for your quotation.
Compare selected equipment
Compare the stated conditions as well as the values. A missing specification is not a zero rating; confirm suitability with Girovac.