Leybold NEO D 65 Two-Stage Rotary Vane Vacuum Pump

Product details

Choosing the NEO D 65

The NEO D 65 is a two-stage oil-sealed rotary vane pump with integrated exhaust oil-mist filtration for laboratory and industrial roughing and backing. Actual pumping speed is 63 m³/h at 50 Hz or 76 m³/h at 60 Hz. Select the motor, oil and gas-ballast arrangement for the process and the available supply.

The D 65 is the highest-capacity NEO D in this group at 63 m³/h actual speed at 50 Hz. The manual lists three-phase motor versions; a standard direct single-phase D 65 is not assumed.

Key specifications

Speed and pressure figures follow the manual’s DIN 28400 conditions for standard variants with the recommended oil and standard gas ballast. Nominal displacement differs from actual pumping speed. Achieved chamber pressure depends on gas load, conductance, oil condition and configuration.

Motor, oil and UK installation

Select a three-phase supply for the standard D 65 motor. The three-phase world-motor version supports UK 400 V, 50 Hz operation when correctly connected. Motor protection and wiring must match the nameplate.

The standard order codes below specify LVO702 oil in manual C7. Other oil builds have different suffixes; use the lubricant specified for the supplied pump and process. Standard three-position, permanent and electromagnetic gas-ballast arrangements are not interchangeable order selections.

Integrated filtration and accessories

The NEO D combines oil-sealed compression with integrated exhaust mist separation and oil return. This reduces external filter plumbing, but it does not remove oil-service requirements or make hazardous exhaust safe to release into the room. Route exhaust for the actual gas and maintain the filter and oil return according to the manual.

Oil-level, temperature and exhaust-filter monitoring accessories are selected separately. A controller or sensor shown in application material is not automatically included. Confirm sensors, cables, inlet protection and any vacuum isolation valve on the quotation.

Pressure and vapour handling

Gas ballast improves handling of suitable condensable vapours but raises ultimate pressure. Provide the full gas composition and vapour load before selecting oil or accessories. The integrated anti-suckback valve is not a safety isolation device; an application requiring assured vacuum isolation needs a separate assessment.

Documented configuration examples

These references identify specific builds for an enquiry. This model-level listing has no single manufacturer part number; confirm the selected build and current availability with Girovac.

Manufacturer image and installation drawing

Manufacturer downloads

• NEO D / SD 16–65 operating instructions, C7 (PDF)

Specification source: 300731504_C7, July 2026, technical table page 22, drawings pages 24–25, ordering pages 30–34 and installation sections. Match the document revision to the pump supplied.

Compare the range and request a quotation

Explore the NEO D family guide or compare NEO D 16, NEO D 25, NEO D 40. Return to the Leybold brand guide.

Also compare TRIVAC L two-stage pumps and ECODRY dry pumps when selecting the compression technology.

For a NEO D 65 quotation, send chamber volume, target pressure, gas and vapour composition, continuous throughput, pump-down time, cycle frequency, inlet and exhaust connections, electrical supply and quantity. Include control, filtration and installation-space requirements. Girovac will confirm the configuration, included equipment, price and delivery.