DVP
DVP TSL Side Channel Blowers
- Model
- TSL Side Channel Blowers
- Operating principle
- Single-stage side channel
- Duty
- Vacuum or positive pressure; model-specific operating limits
DVP brand guide / Product family
DVP TSL side channel blowers
Side channel blowers with a model and motor selection table for vacuum and pressure applications.
Use a curve at the working point
TSL side channel blowers cover vacuum and pressure duties through specific model and motor combinations. Maximum flow and maximum pressure are endpoints, not one simultaneous duty point. Use the correct frequency curve and consider installation losses, temperature and motor load before selecting a configuration.
What to check when selecting this range
Read the individual curve at working pressure and frequency. Maximum flow and maximum pressure are not simultaneous operating points.
Compare the listed models
Compare values with their stated gas, frequency and configuration conditions. A blank specification means it needs confirmation. Listed equipment is subject to a quotation; inclusion here does not indicate stock.
| Model | Model | Operating principle | Duty |
|---|---|---|---|
| DVP TSL Side Channel Blowers | TSL Side Channel Blowers | Single-stage side channel | Vacuum or positive pressure; model-specific operating limits |
Models and configurations
Documentation and specification checks
Open the model page for its specifications and available manufacturer downloads. Match the full model, suffix and revision to the equipment being supplied. Keep installation limits and performance test conditions with the figure when comparing alternatives.
Compare equipment across manufacturers
Related DVP families
- DVP SC & SB dry rotary vane pumps
- DVP LC & MD oil-lubricated pumps
- DVP LC WR water-resistant pumps
- DVP LC Kzero pumps
- DVP LC HV variants
- DVP PA & VB dry claw pumps
- DVP ZA oil-free piston pumps
- DVP RD, RC, DB & DC rotary vane pumps
- DVP ATEX model selection
- DVP CB, CC & VA compressors
- DVP BCA boosters & CBL packages
- DVP CPA, CPAP, CPV & XC systems
Return to the DVP brand guide · Explore all product families
Specify your DVP equipment
Send the process, working pressure, gas, required capacity and electrical supply. For measurement, include the range, connection, output and controller. We can confirm the model, accessories and documentation for your quotation.
Compare selected equipment
Compare the stated conditions as well as the values. A missing specification is not a zero rating; confirm suitability with Girovac.