DVP
DVP LC 205HV Oil-lubricated Vacuum Pump
- Nominal pumping capacity
- 205 / 245 m³/h (50 / 60 Hz)
- End / ultimate pressure
- 0.1 mbar (gas ballast closed) — absolute
- Motor power
- 5.5 / 6.6 kW (50 / 60 Hz; three-phase)
DVP brand guide / Product family
DVP LC HV variants
LC 205HV and LC 305HV have their own published vapour-handling and oil specifications.
Use the LC HV data for the selected variant
LC HV selection includes total final pressure, water-vapour capacity, gas-ballast conditions and oil. These figures describe different operating points and should not be combined into a single unrestricted rating. State the pressure and throughput required during normal running and the electrical supply available.
What to check when selecting this range
Compare total final pressure, gas-ballast conditions and vapour capacity. The HV model designation alone does not describe its complete operating range.
Compare the listed models
Compare values with their stated gas, frequency and configuration conditions. A blank specification means it needs confirmation. Listed equipment is subject to a quotation; inclusion here does not indicate stock.
| Model | Nominal pumping capacity | End / ultimate pressure | Inlet / outlet connections |
|---|---|---|---|
| DVP LC 205HV Oil-lubricated Vacuum Pump | 205 / 245 m³/h (50 / 60 Hz) | 0.1 mbar (gas ballast closed) — absolute | 2 inch G / 2 inch G |
| DVP LC 305HV Oil-lubricated Vacuum Pump | 305 / 365 m³/h (50 / 60 Hz) | 0.1 mbar (gas ballast closed) — absolute | 2 inch G / 2 inch G |
Models and configurations
DVP
DVP LC 305HV Oil-lubricated Vacuum Pump
- Nominal pumping capacity
- 305 / 365 m³/h (50 / 60 Hz)
- End / ultimate pressure
- 0.1 mbar (gas ballast closed) — absolute
- Motor power
- 7.5 / 9 kW (50 / 60 Hz; three-phase)
Documentation and specification checks
Open the model page for its specifications and available manufacturer downloads. Match the full model, suffix and revision to the equipment being supplied. Keep installation limits and performance test conditions with the figure when comparing alternatives.
Compare equipment across manufacturers
Related DVP families
- DVP SC & SB dry rotary vane pumps
- DVP LC & MD oil-lubricated pumps
- DVP LC WR water-resistant pumps
- DVP LC Kzero pumps
- DVP PA & VB dry claw pumps
- DVP ZA oil-free piston pumps
- DVP RD, RC, DB & DC rotary vane pumps
- DVP ATEX model selection
- DVP CB, CC & VA compressors
- DVP TSL side channel blowers
- DVP BCA boosters & CBL packages
- DVP CPA, CPAP, CPV & XC systems
Return to the DVP brand guide · Explore all product families
Specify your DVP equipment
Send the process, working pressure, gas, required capacity and electrical supply. For measurement, include the range, connection, output and controller. We can confirm the model, accessories and documentation for your quotation.
Compare selected equipment
Compare the stated conditions as well as the values. A missing specification is not a zero rating; confirm suitability with Girovac.