DVP
DVP LC 106 Kzero Oil-lubricated Vacuum Pump
- Nominal pumping capacity
- 106 / 127 m³/h (50 / 60 Hz)
- End / ultimate pressure
- 4 mbar — absolute
- Motor power
- 2.2 / 2.7 kW (50 / 60 Hz; three-phase)
DVP brand guide / Product family
DVP LC Kzero pumps
Kzero variants are grouped separately because their lubricant and operating-pressure specifications differ from other LC versions.
Keep the full LC model suffix
Kzero versions have distinct lubricant and operating-pressure requirements. Compare their published data with the actual working duty, including the continuous pressure region. A replacement request should include the full nameplate, oil currently used and process gas so that the appropriate model and fluid can be identified.
What to check when selecting this range
Use the complete model suffix when comparing final pressure or ordering fluid. Confirm the manufacturer lubricant specification and continuous operating region.
Compare the listed models
Compare values with their stated gas, frequency and configuration conditions. A blank specification means it needs confirmation. Listed equipment is subject to a quotation; inclusion here does not indicate stock.
| Model | Nominal pumping capacity | End / ultimate pressure | Inlet / outlet connections |
|---|---|---|---|
| DVP LC 106 Kzero Oil-lubricated Vacuum Pump | 106 / 127 m³/h (50 / 60 Hz) | 4 mbar — absolute | 1½ inch G / 1¼ inch G |
| DVP LC 151 Kzero Oil-lubricated Vacuum Pump | 151 / 181 m³/h (50 / 60 Hz) | 4 mbar — absolute | 1½ inch G / 1¼ inch G |
| DVP LC 205 Kzero Oil-lubricated Vacuum Pump | 205 / 245 m³/h (50 / 60 Hz) | 0.3 mbar — absolute | 2 inch G / 2 inch G |
| DVP LC 305 Kzero Oil-lubricated Vacuum Pump | 305 / 365 m³/h (50 / 60 Hz) | 0.3 mbar — absolute | 2 inch G / 2 inch G |
Models and configurations
DVP
DVP LC 151 Kzero Oil-lubricated Vacuum Pump
- Nominal pumping capacity
- 151 / 181 m³/h (50 / 60 Hz)
- End / ultimate pressure
- 4 mbar — absolute
- Motor power
- 3.3 / 3.7 kW (50 / 60 Hz; three-phase)
DVP
DVP LC 205 Kzero Oil-lubricated Vacuum Pump
- Nominal pumping capacity
- 205 / 245 m³/h (50 / 60 Hz)
- End / ultimate pressure
- 0.3 mbar — absolute
- Motor power
- 5.5 / 6.6 kW (50 / 60 Hz; three-phase)
DVP
DVP LC 305 Kzero Oil-lubricated Vacuum Pump
- Nominal pumping capacity
- 305 / 365 m³/h (50 / 60 Hz)
- End / ultimate pressure
- 0.3 mbar — absolute
- Motor power
- 7.5 / 9 kW (50 / 60 Hz; three-phase)
Documentation and specification checks
Open the model page for its specifications and available manufacturer downloads. Match the full model, suffix and revision to the equipment being supplied. Keep installation limits and performance test conditions with the figure when comparing alternatives.
Compare equipment across manufacturers
Related DVP families
- DVP SC & SB dry rotary vane pumps
- DVP LC & MD oil-lubricated pumps
- DVP LC WR water-resistant pumps
- DVP LC HV variants
- DVP PA & VB dry claw pumps
- DVP ZA oil-free piston pumps
- DVP RD, RC, DB & DC rotary vane pumps
- DVP ATEX model selection
- DVP CB, CC & VA compressors
- DVP TSL side channel blowers
- DVP BCA boosters & CBL packages
- DVP CPA, CPAP, CPV & XC systems
Return to the DVP brand guide · Explore all product families
Specify your DVP equipment
Send the process, working pressure, gas, required capacity and electrical supply. For measurement, include the range, connection, output and controller. We can confirm the model, accessories and documentation for your quotation.
Compare selected equipment
Compare the stated conditions as well as the values. A missing specification is not a zero rating; confirm suitability with Girovac.