Leybold TRIVAC D 90 L Two-Stage Rotary Vane Vacuum Pump
The TRIVAC D 90 L is a two-stage, oil-sealed rotary vane pump for roughing and suitable high-vacuum backing duties in research and industry. Actual speed 79/95 m³/h at 50/60 Hz.
Manufacturer photograph supplied as TRIVAC D 90 L. Motor and accessories depend on the selected configuration.
Quote the complete code when requesting this model. Each row identifies a configuration; price, supply and the final specification are confirmed on quotation.
Choosing the TRIVAC D 90 L Two-Stage Rotary Vane Vacuum Pump
The TRIVAC D 90 L is a two-stage, oil-sealed rotary vane pump for roughing and suitable high-vacuum backing duties in research and industry. Its actual pumping speed is 79 m³/h at 50 Hz or 95 m³/h at 60 Hz. Choose it where an oil-sealed arrangement suits the process and the installation can accommodate the required three-phase motor, exhaust routing and routine oil service.
The D 90 L provides the highest capacity in the TRIVAC L family: 79 m³/h actual pumping speed at 50 Hz. Allow for its longer body and 83 kg net mass without oil when planning installation.
Key specifications
Specification
Details
Actual pumping speed, 50 / 60 Hz
79 / 95 m³/h
Nominal pumping speed, 50 / 60 Hz
92 / 110 m³/h
Ultimate total pressure, gas ballast closed
0.003 mbar
Ultimate total pressure, gas ballast OP1 / OP2
0.006 / 0.02 mbar
Inlet / exhaust
DN40 ISO-KF / DN40 ISO-KF
Standard EU/CN motor, 50 Hz
220/230/380/400 V, three-phase, 2.2 kW
Dimensions with motor (L × W × H)
859 × 244 × 352 mm; verify selected motor envelope
Net mass without oil
83 kg
Oil fill, minimum / maximum
3.6 / 4.8 litres
Ambient operation
10–40 °C
Pumping-speed and pressure values follow the manual’s DIN 28400 conditions with standard gas ballast. Nominal speed is distinct from actual pumping speed. Chamber conductance, gas load, oil condition and accessories affect achieved pressure.
Motor selection and UK installation
For a UK industrial 400 V, 50 Hz supply, specify the matching three-phase motor and connection. The manual also lists EU/US IE4 and JP/KR motor options; voltages and rated powers vary by order code. This is not a standard UK single-phase plug-in pump. Confirm the nameplate, motor protection, connection and direction of rotation during installation.
Oil, gas ballast and supplied equipment
The standard factory-filled pump uses LEYBONOL LVO 130 mineral oil. The manual lists the pump with motor, a DN40 centring ring, a DN40 centring ring with dirt trap and two clamping rings in the supplied equipment. Confirm the selected build and any special lubricant requirement on the quotation.
Gas ballast helps manage suitable condensable vapours but increases ultimate pressure. Give the vapour type, load and cycle when selecting the pump. Plan access for oil-level checks, changes and exhaust maintenance, and use the manufacturer’s oil and maintenance guidance.
Optional exhaust and control equipment
Specify an oil-mist filter, oil-return arrangement or electromagnetic gas-ballast valve if the process needs them. These are accessories, not assumed standard equipment. An oil-return arrangement changes the stated ultimate-pressure conditions: the manual lists 0.009 mbar with the oil-return kits connected.
Leybold operating instructions (PDF) — 300956027_002_A3, September 2026, pages 14–24, 27–28 and 66–73; model drawing page 18. Consult the full instructions for operating limits, electrical installation and maintenance.
To request a quotation for the TRIVAC D 90 L Two-Stage Rotary Vane Vacuum Pump, send chamber volume, target pressure, gas and vapour composition, throughput, pump-down time and cycle frequency, connection size, electrical supply and quantity. Include any control, exhaust-treatment and installation-space requirements. Girovac will confirm the suitable configuration, price and delivery.
Confirm the exact version, electrical supply and connections. Ask whether oil, filters, fittings, cables or controllers are included or separately specified.
Availability, lead time and the applicable warranty are confirmed for your quotation. A catalogue listing does not reserve stock.
We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.