DVP CPV 4/8 Vacuum System

Product details

Overview

The DVP CPV 4/8 is a vacuum system. The documented capacity is 4 / 4.4 m³/h (50 / 60 Hz). Total final pressure is 2 mbar. Ask Girovac to match the configuration to your duty and electrical supply.

Choosing the right configuration

For a packaged or central vacuum installation, list each user, its operating pressure and which users run together. Agree the receiver, controls, filtration and standby requirement as part of the quotation. Installed pump capacity alone does not establish performance at the far end of the pipework.

Portable receiver-and-pump assembly for suitable holding and fastening applications. The pressure inside the receiver is shown by a vacuum gauge. Check the complete holding-system design and leakage load.

Technical specifications

Values apply to the stated model and conditions. Where two figures are shown, follow the 50 / 60 Hz order in the label. Confirm the motor, connections and supplied accessories in your quotation.

Manufacturer documentation

Download the original DVP CPV 4/8 datasheet (PDF). The original document includes its revision information and any additional model-specific conditions.

Frequently asked questions

Which related DVP models should I compare?

Compare DVP XC 405, DVP XC 605, DVP XC 905. Check the working pressure, capacity and motor rather than choosing by the model number alone. Browse the full DVP range.

Which gauge should I use with this pump or system?

For suitable rough-vacuum duties, compare industrial vacuum dial gauges. Where a display, output or control signal is needed, review digital vacuum meters and vacuum transducers. Measure at the chamber or point of use when that is the pressure your process depends on. Gauge calibration can be specified around the operating range and required test points.

How do I select oil and service parts?

Use the complete model, serial number and manufacturer oil specification. Different suffixes and gear compartments can require different lubricants. See vacuum oils and greases and send the nameplate details when requesting parts.

What information does Girovac need for a quotation?

Send the model, required flow at working pressure, gas or vapour, operating hours, electrical supply and any installation restrictions. For a replacement, include a nameplate photograph. We will confirm the proposed configuration, price and lead time before ordering.

Discuss your application

Call 01692 660 117 or use the product enquiry form. Give us the model and working conditions so we can check the equipment and supporting accessories together.