MIL'S brand guide / Product family
Need to reach a lower pressure? The EVISA HV range includes the E25.2 HV, E40.2 HV and E100.R HV. These oil-lubricated rotary vane pumps offer options for applications where the working vacuum is a key part of the choice.
EVISA HV is a distinct set of variants rather than a label for every EVISA pump. Compare the required working pressure with the model data and the gas-ballast conditions. Include vapour load, oil and electrical supply. The best choice depends on how the pump performs through the actual cycle, not just its lowest final pressure.
Tell us the pressure you need to maintain and what you will be pumping. We can compare the model performance curves with you, including how gas ballast affects the achievable vacuum.
Standard and HV figures are shown separately on the individual product pages; not every low-pressure variant has a separate listing. The E100.R HV page also identifies standard E100.R performance. Confirm the full suffix, gas-ballast arrangement and order reference before selecting a pump. A standard configuration is not automatically an HV or ATEX configuration.
Compare values with their stated gas, frequency and configuration conditions. A blank specification means it needs confirmation. Listed equipment is subject to a quotation; inclusion here does not indicate stock.
| Model | Nominal pumping capacity | PNEUROP pumping speed (50 Hz) | PNEUROP pumping speed (60 Hz) |
|---|---|---|---|
| MIL’S EVISA E25.2 HV Rotary Vane Vacuum Pump | 30 m³/h at 50 Hz; 35.3 m³/h at 60 Hz | 28 m³/h; PNEUROP 6602 at 20 °C | 33.6 m³/h; PNEUROP 6602 at 20 °C |
| MIL’S EVISA E40.2 HV Rotary Vane Vacuum Pump | 47.7 m³/h at 50 Hz; 57.2 m³/h at 60 Hz | 41.5 m³/h; PNEUROP 6602 at 20 °C | 49.8 m³/h; PNEUROP 6602 at 20 °C |
| MIL’S EVISA E100.R HV Rotary Vane Vacuum Pump | 100 m³/h at 50 Hz; 120 m³/h at 60 Hz | 96 m³/h; PNEUROP 6602 at 20 °C | 115 m³/h; PNEUROP 6602 at 20 °C |
MIL'S
MIL'S
MIL'S
Open the model page for its specifications and available manufacturer downloads. Match the full model, suffix and revision to the equipment being supplied. Keep installation limits and performance test conditions with the figure when comparing alternatives.
Return to the MIL'S brand guide · Explore all product families
Send the process, working pressure, gas, required capacity and electrical supply. For measurement, include the range, connection, output and controller. We can confirm the model, accessories and documentation for your quotation.
Compare the stated conditions as well as the values. A missing specification is not a zero rating; confirm suitability with Girovac.
Copyright © 2026 Girovac Ltd | Registered in England and Wales Number: 01758137 | Cookie Policy | Privacy Policy | Delivered by Postino
